Buy Best Massage Shower
Wall Panels System

What are the Water Pressure Requirements for a Shower Panel?

This adds much water pressure requirements for this system, as these are crucial to certain optimum performance and functionality. In addition, these systems most often include various shower functions like rainfall showerheads, body jets, and handheld showers that need enough water pressure to be highly satisfying.

Here's a more detailed breakdown:

Usual Water Pressure Range: 28-72 psi

Water pressure in most systems is usually within the range of 28 to 72 psi. Such a range allows rainfall heads, massage jets, and even handheld sprayers to function underratically and at full capacity.

Low Pressure, 28-40 psi: The lower this scale, one can hope the basic functionality of a hand-held showerhead and smaller body jets; whereas larger features like rainfall heads and larger body jets may have a reduced flow rate.

Moderate Pressure, 40-60 psi: This is considered the ideal working pressure range for most installations. A safe middle-ground flow is achieved for all functions, even when multiple are running together, without performance drops.

High Pressure: Higher pressure, like in the range of 60-72 psi, permits a more forceful showering experience. In this regard, it may mean that body jets and rainfall showerheads will be able to provide you with a forceful stream continuously. However, once the water pressure exceeds 72 psi, internal parts are forced to operate at a stressed level which will cause wear and tear over time.

Factors Affecting Water Pressure

Several factors are responsible for affecting actual water pressure in your bathroom:

Type of Plumbing System: Gravity-fed systems generally have a lot lower pressure compared to the direct feed systems or those with pressure pumps.
Water heater: The type and flow rate of the water heater may be the cause affecting the pressure. This may mean that the minimum activation pressure might be a bit higher for the tankless water heaters, while in the traditional water heaters, the flow may be restricted at times.
Pipe Diameter: Low diameter pipes impede the flow of water hence low pressure. It is necessary to ensure the plumbing system utilizes large enough diameter pipes.
Elevation: In case the bathroom is higher than where the water is coming from, for instance, a multi-story house, you will have low pressure on the top floor unless a booster pump is utilized.

Low Pressure Designed Systems

Some of them are meant for homes with low pressure systems-that is, less than 40 pounds per square inch. Many such models boast of:

Flow Restrictors: Devices that limit the water discharge and yet ensure the same efficiency as with higher pressure.
Special Nozzle Designs: Nozzles and jets that give a greater 'feel' factor to water pressure that is, in fact, much lower.

Systems Requiring High Pressure

Other high-end or luxury models, especially the ones featuring multi-function jets, larger rainfall heads, and waterfalls, actually need water pressure closer to 72 psi to function properly. For such a situation:
Booster Pumps: In a few cases, the water booster pump may be required to provide the needed pressure level.
Pressure Regulators: A number of these systems may also employ a regulator to prevent the pressure from surging beyond the maximum limits, staying within a safe range.

Checking Specifications with the Manufacturer

It is always a good idea to check the specifications with the manufacturer prior to installation for the particular model. Some models will certainly have different requirements, especially if they have added features such as steam, LED lighting, or Bluetooth connectivity, which could alter how water pressure might be distributed across functions. Besides, some systems are fitted with built-in flow regulators that prevent excessive water consumption, and these would affect the required water pressure to provide effective functioning.

Water Pressure Influence on Performance

Insufficient Pressure: If the pressure is too low, then the system will not work properly. The rainfall heads will only sprinkle a weak drizzle; body jets will not have the pressure necessary for massage functions.
Too Much Pressure: On the other hand, if the pressure happens to be very high-perhaps higher than the upper limit recommended-then leakages, additional wear and tear on internal parts, or failure of sensitive features like thermostatic controls may result.

Water Pressure Measuring Tools

Pressure Gauges: The pressure gauges for water are very affordable tools that an installer or a homeowner can attach to a faucet or showerhead as a way of testing the actual pressure present in the bathroom before installation. The tool delivers the actual reading of psi level.
Booster Pumps and Regulators: Where water pressure is out of the specified range, either a booster pump installation for increasing the pressure or a regulator for reducing excessively high pressure will ensure efficiency in the operation of the system without damage. In ensuring the water pressure falls within the required specification, this will optimize the performance of the shower system for a lifetime of spa-like experiences without compromise on quality.

The shower panels prices are normally within a range of $249 to $478 while special feature shower panels could cost much more. Choose from many styles and functions with features that you would never imagine. At BathSelect, you will find that all of our shower panels come complete with a shower head, handheld shower, massage body jets, built-in thermostatic device, built-in diverter valve, flow control, etc. We are confident you select and enjoy your selection for your ultimate shower experience!

Turn Your Bathroom into a SPA ...
with BathSelect Sensational Shower Wall Panels:

BathSelect Shower panels allow you to turn your home bathroom into a luxury spa experience easily. With the wide variety of options, you can find decor or enhance your bathroom as per your liking. Shower Massage Panel with rainfall shower head can make your showering experience even more spa-like. The Shower Panel is available in many style and function options, including the pulsating massage body spray, the adjustable shower head, tub spout shower panel, led shower panels, the digital display shower towers, and the thermostatic shower panel. On the other hand, a shower panel with handheld shower head gives you the freedom to move the shower spray anywhere in your bathroom. Enjoy a spa quality massage in the comfort of your home bathroom with top quality shower panels from BathSelect.

Our pulsating massage Shower Wall Panels come with features like:

We offer unique styles for every individual

Adjustable hand held shower, Adjustable body massage sprays, Large overhead shower, Individual water controls, An anti-scalding device, and much more!

FontanaShowers™ feature unique elements of design like shelves, mirrors and accessories; hence your bathroom shower not only gets a beautiful facelift but also becomes more functional. Installation is easy on all BathSelect shower panels with just a hot and cold water connection and hassle-free mounting with wall-attached brackets.

Learn more

FontanaShowers™ shower panels will turn your ordinary shower into a home spa. BathSelect massage shower panels come loaded with some extra features including rainfall shower heads, massaging shower heads, Shower head wall panels, Jetted adjustable body nozzles, Jetted shower panel, digital display complete bathroom shower panel systems,luxury shower panel, and more, thus in less than 30 minutes, you can transfer your shower into a luxurious showering experience.

Join Us

Be the First to Know

Best Unqie Design Showers. Get BathSelect emails of Shower Panel new product releases and more!

Email

Submit