Installation Manual For BathSelect Solid Brass Multi Color LED Rain And Waterfall Shower Head

Home > Specs BathSelect Solid Brass Multi Color LED Rain And Waterfall Shower Head

BathSelect Cairo Solid Brass Multi Color LED Rain And Waterfall Shower Head With Thermostatic Mixer Valve And Handheld Shower In Dark Oil Rubbed Finish

Enhance your bathroom with BathSelect solid brass multi-color LED rain and waterfall shower head with thermostatic Mixer Valve Shower Set. This wonderful showerhead comes in a high-quality bathroom head shower and mixer. This rectangular style wall mount ceramic Valve material shower set comes in high-quality solid brass and will turn your shower into one that looks exceptional. If you already have dark oil rubbed bronze finish in your bath fixtures, it makes perfect sense to invest in an oil rubbed bronze shower set. This shower combines temperature control and precise water flow regulation. The valve core material is a high quality of ceramic. This shower combines temperature control and precise water flow regulation. It has self-cleaning silicon nozzle water and air mixture technology and the showerhead is a multi-functional mode like rainfall mode, waterfall mode. It's a great experience showering with the water falling directly overhead like rain or waterfall, offering you the luxury and relaxing shower enjoyment. This shower set has been made with premium-grade material.

BathSelect Cairo Solid Brass Multi-Color LED Rain And Waterfall Shower Set Features:

Brand Name: BathSelect
Model Number: BS9908
Type: Shower Set
Cold/Hot Water Control Type: Single holder dual control
Style: Contemporary
Number of Handle: 3-Way Dual Single Handle
Surface Treatment: Dark Oil Rubbed Bronze
Type: Fixed Type
Valve Core Material: Ceramic
Surface Finish: Brass
Bath & Shower Faucet Type: mount shower
Installation Type: Wall Mount

BathSelect Cairo Solid Brass Multi Color LED Rain And Waterfall Shower Head With Thermostatic Mixer Valve And Handheld Shower In Dark Oil Rubbed Finish

BathSelect® Manufacturer Warranty Information

1. Open the top cover and drill according to the marked position.

Mark by the position of the four holes.
Take care to avoid wires and pipes to prevent damage.
Be sure to confirm that the four holes are on the same horizontal line.

2. Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected.

3. Reinstall the top cover.

Hand-Held Shower Instructions

5. Hole Locations For Wall Mount

Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.

7. Wall Mount Installation

Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A).

8. Drop Elbow & Hose Installation

Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.

Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).

9. Unit Start-Up
Turn on hot and cold water supplies, and check all connections for leaks.

10. Final Flushing

For final flushing, turn the valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.

11. Shower Arm Installation

Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Conned Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.

Warning: Make sure Hand Shower (11C) is securely tightened to Hose (11D).