Installation Instructions for Antique Brass Dual Handled Bathroom Sink Faucet
BathSelect Crimea Antique Brass Dual Handled Bathroom Sink Faucet
When it comes to antique style faucets there are a few essential features that will set your brain in the right time frame: the particular Finish, the specific faucet shape, and the handle style characteristic for that time. Our Crimea brass bathroom faucet is representative of this faucet style, and it can successfully recreate the feel of that era. It is deck mount, with three-hole installation, dual handle for hot and cold water. It is made of the best materials: the body is made of solid brass and the valve core material is ceramic, for improved functionality and long-lasting It comes complete with mounting accessories and installation instructions.
BathSelect Crimea Antique Brass Dual Handled Bathroom Sink Faucet Features:
- Brand Name: BathSelect
- Model Number: BS111DMA
- Type: Sink Faucet
- Style: Classic
- Hot and Cold Water: Yes
- Number of Handles: Double Handles
- Surface Treatment: Antique Bronze Finish
- Style: Double Support with three Holes
- Type: Ceramic Stack
- Core Material: Ceramic
- Installation type: Deck Mount
|
|
BathSelect® Manufacturer Warranty Information![](https://www.bathselect.com/v/vspfiles/assets/images/BathSelect%20Warranty.jpg)
|
|
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%201.png)
Bathroom Sink Drain
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%202.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%203.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%204.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%205.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%206.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%207.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%209.png)
![](https://www.fontanashowers.com/v/vspfiles/assets/images/Burnaby%20Deck%20Mount%20Dual%20Handle%20Bathroom%20Sink%20Faucet%20Installation%2010.png)
INSTRUCTIONS
- Before installing, read entire Widespread Faucet Installation Instructions. Observe all local building and safety codes.
- For the following Installation Instructions for your new Widespread Faucet it is assumed that any old fixtures have been removed and any repairs or modifications to the water supply have been completed.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service, If you need assistance or have questions while installing your Widespread Faucet, contact Customer Service.
TOOLS AND MATERIALS:
- Adjustable Wrench
- Silicone Sealant
- Damp Cloth
INSTALLATION
- If your faucet comes with the brass T attached to the faucet body, unthread and remove the T and associated hardware.
- Thread the silver mounting washer and rubber sealing gasket on the faucet body.
- Apply a bead of silicone sealant to the underside of the spout, or faucet base, and thread through the center mounting hole.
- Thread the mounting hardware and brass T onto the spout pipe and hand-tighten to secure.
- Check to make sure the faucet is properly aligned and adjust as needed. When the faucet is in the proper position, finish tightening mounting hardware with your adjustable wrench. Tip: Make sure that the T outlets are aligned at an angle to allow maximum clearance for water connections.
- Wipe away any excess sealant around the faucet base using your damp cloth.
- Assemble the handles by screwing the lock nuts down to the end of the handle bodies. If handles are assembled move on to step 8.
- Insert the handle bodies up through the mounting holes. Thread the plastic slip washers and rubber sealing gaskets onto the handle bodies to secure.
- Hand tighten to attach the hot and cold flexible water feed tubes to the handle bodies and brass T. Give a ¼ turn with pliers or wrench, but don’t over tighten. (Hot water is always on the left and cold water is always on the right.) Curve tubes as necessary to ensure there are no kinks or knots.
|
|
|