Installation Instructions for Oil Rubbed Bronze Round Color Changing LED Rain Shower Head
Juno 20 Inch Oil Rubbed Bronze Round Color Changing LED Rain Shower Head
This
20" LED Juno showers Head with Dark Oil Rubbed Bronze finish goes equally well with traditional and contemporary decor and can be particularly effective for rustic look, or as a neutral for traditional-style baths.Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs
Features:
This Shower Head is Installed with two ceiling mounts
This high tech rain shower head powers the LED lights using a built in hidden dynamo
The lights will automatically turn on when water pressure is turned on
The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light
The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it
Never be scalded again by entering a shower that is just too hot
The threading is universal so it will fit any standard shower head by simply unscrewing the old one by hand and attaching the new one. A shower of same finish in oil rubbed bronze is included.
Modern stylish design in ORB finish is made to match or stand out from your other bathroom fixtures
High quality This modern shower head is made out of brass and finished in oil rubbed bronze, so it's made to last!
1. Ceiling arm mounting plate 2. Olive 3. Locking nut 4. Ceiling trim 5. Ceiling arm 6. Emily fixed showerhead 7. Fixing screws and wall plugs (not shown)
Remove your existing shower head with a wrench.
Set the wrench in place and turn the nut to the left to loosen it.
Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
Clean the threads of the base of the shower head steel wool.
Be sure to remove any debris that had collected around the threads.
Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
Tighten the LED shower head.
Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.
