The Kitchen Sink Deck Mount Motion Sensor Foam Soap Dispenser - Installation Details
Lenox Commercial Bathroom/ Kitchen Sink Deck Mount Automatic Foam Soap Dispenser
The lenox kitchen or bathroom sink deck mount motion sensor foam soap dispenser which can dispense the soap efficiently has a fully chrome plated brass body. All in one sensor design and with 0.39gal(1500ml)capacity soap container can pump out soap right after sensed by the sensor eye. Use multi-voltage power supply,suitable for input voltage between AC 100V-240V,and it can meet the requirement of different projects. It Save soap ,save water,save time as well. This touchless motion sensor faucet reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. It cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing by eliminating unnecessary and unattended water flow. Covenient to maintain with built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean. It can be mounted to any sink surface.Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
Lenox Commercial Bathroom/ Kitchen Sink Deck Mount Motion Sensor Foam Soap Dispenser Features
- Material: Brass
- Model Number: BS9800
- Color: Chrome
- Type: Automatic Foam Soap Dispenser
- Colour: Chrome
- Capacity: 0.39gal(1500ml)
- Usage: Bathroom,Washing, Public Place
- Installation: Deck mount
- Application: Bathroom foam soap dispenser
- Size: 5.7*4.13*1.96 inches (145x105x50mm)
- Power supply: DC 6V
- Function: Anti-bacteria
- Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
|
|
BathSelect® Manufacturer Warranty Information
|
|
Spout Installation
Wall Mounted
Please exercise special care not to cut the soap hose or damage sensor cable while fastening the brass nut.
Spout Mount
Before installing the stainless steel bracket please make sure that there will be plenty of space for the pump housing. Please exercise special care not to cut the soap hose or damage sensor cable while fastening the brass nut.
Pump Installation
Wall-Mounted Method
1. Mount the S.S bracket on the wall.
2. Insert the pump onto S.S bracket.
3. Insert the locking plate into S.S bracket.
Spout Mounted Method
1. Insert the pump onto S.S bracket.
2. Insert the locking plate into S.S bracket.
Component Connection
1. Connect the tube onto the host.
2. Fasten the nut.
Pass the soap tube through the nut and then connect the tube onto the host and fasten the nut.
Connect the male end with female end of power cable and push firmly.
Connect the male end with female end of power cable properly. Please pay attention to pins when connecting the power cable together.
Soap Replacement
Wall Mounted
1. Unscrew the empty bottle.
2. Add soap into the empty bottle.
3. Affix the bottle with full soap onto the pump, and do not over tighten..
Spout Mounted
1. Unscrew the empty bottle.
2. Add soap into the empty bottle.
3. Affix the bottle with full soap onto the pump, and do not over tighten..
Use
1. Place hands immediately under soap spout.
2. A predetermined amount of soap will dispense.
3. If more soap is needed, please remove hands & repeat.
Incorrect Installation
Keep sensor range adjustment within 4 inches away from centre of spout. This can only be done with optional remote control.
Installing electronic soap dispenser and faucet with intersecting centre lines might lead to accidental activation of either or both.
Correct Installation
Keep sensor ranges factory preset.
Keep soap spout and faucet centre lines parallel.
Usage of Green Button
When the soap bottle is filled with soap, press green button till soap dispenses out of nozzle.
Please do not use the sensor when the green switch is pressing, because they cannot be used at the same time, otherwise, it might lead to the damage to the machine.
Battery Replacement
1. Unscrew the screws of back cover.
2. Open the back cover.
3. Properly place the batteries into the box.
4. Close the back cover and fasten the screws.
Place batteries in the battery box according to drawings above.
|
