Fontana 16 Inch Oil Rubbed Bronze Round Color Changing LED Rain Shower Head

This Fontana 16" Oil Rubbed Bronze Round Color Changing LED Rain Shower Head finish that goes equally well with traditional and contemporary décor and can be particularly effective for a rustic look, or as a neutral for traditional-style baths. Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built-in dynamo that takes advantage of the water pressure to create the energy to light the bulbs. This showerhead will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and light. The led light will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it.

Fontana 16" Oil Rubbed Bronze Round Color Changing LED Rain Shower Head Features:

Showerhead Width: 16" Showerhead Length: 16" Material: Stainless Steel Finish: Oil Rubbed Bronze Showerhead Style: Contemporary Rain Shower Mount Method: Ceiling Mount Connection: 1/2" US standard (included) Brand: Fontana Shower Manufacturer: Warranty 1-Year Shower Arm: Optional (purchased separately Flow rate: 2.5 GPM Threading: Universal Standard Anti Scald Device: Yes Led feature: Water Flow

BathSelect® Manufacturer Warranty Information

Installation Instructions for Fontana Oil Rubbed Bronze Round Color Changing LED Rain Shower Head

7. Fixing screws and wall plugs (not shown)

1. Remove your existing shower head with a wrench.
2. Set the wrench in place and turn the nut to the left to loosen it.
3. Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
4. Clean the threads of the base of the shower head steel wool.
5. Be sure to remove any debris that had collected around the threads.
6. Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
7. Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
8. Tighten the LED shower head.
9. Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
10. Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.