The Dual Automatic Deck Mount Antique Bronze Finish Commercial Sensor Faucet - Installation Details
Dual Automatic Deck Mount Antique Bronze Finish Commercial Sensor Faucet And Touchless Soap Dispenser
Automatic deck mount bronze finish eye catching design which is both functional and nice to look at, the sensor faucet as well as soap dispenser has been developed with ease in mind. This dual sensor faucet And Touchless Soap Dispenser is an elegant fixture that will seamlessly fit in any contemporary restroom. Its easy use technology definitely make your cleaning job easier.This cast brass electronic motion faucet is now available in dual function water And Touchless Soap Dispenser sensor faucet. This touch less motion sensor touchless faucet A touchless operation reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles.Uses 4 AA Alkaline Batteries (purchase separately).Water Pressure: 0.5 - 7.0 KGS /cm, 10-125 psi. With its micro-computer controlling its action, the motion sensor touchless faucet can self adjust its best detection zone as per the color and shape of lavatory.Sensor faucet with built-in Infrared AI smart-chip no water dripping design 100% touch-free operation. Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
Automatic Deck Mount Antique Bronze Finish Dual Commercial Sensor Faucet And Touchless Soap Dispenser Features
- Complete motion detection touch less operation
- Sensitive Sensor with Infrared AI Smart-Chip Automatic Soap Dispenser
- Factory set to 30-second Auto Shutoff (can be adjusted).
- Water Pressure: 0.5 - 7.0 KGS /cm , 10 - 125 psi
- Solid Brass Construction, Antique Bronze Finish
- Easy to Install - Instructions Included
- Water resistant solenoid enclosure
- Advanced energy saving design for long lasting battery life
- Sensor faucet comes complete with Hoses & Accessories
- Power Supply: AC 110 V and DC 6 V (batteries not included)
- AC/DC power option..
- ADA Compliant.
- Easily can be installed in new or retrofit applications.
- Usage: Commercial / Residential
|
|
BathSelect® Manufacturer Warranty Information
|
|
Spout Installation
Wall Mounted
Please exercise special care not to cut the soap hose or damage sensor cable while fastening the brass nut.
Spout Mount
Before installing the stainless steel bracket please make sure that there will be plenty of space for the pump housing. Please exercise special care not to cut the soap hose or damage sensor cable while fastening the brass nut.
Pump Installation
Wall-Mounted Method
1. Mount the S.S bracket on the wall.
2. Insert the pump onto S.S bracket.
3. Insert the locking plate into S.S bracket.
Spout Mounted Method
1. Insert the pump onto S.S bracket.
2. Insert the locking plate into S.S bracket.
Component Connection
1. Connect the tube onto the host.
2. Fasten the nut.
Pass the soap tube through the nut and then connect the tube onto the host and fasten the nut.
Connect the male end with female end of power cable and push firmly.
Connect the male end with female end of power cable properly. Please pay attention to pins when connecting the power cable together.
Soap Replacement
Wall Mounted
1. Unscrew the empty bottle.
2. Add soap into the empty bottle.
3. Affix the bottle with full soap onto the pump, and do not over tighten..
Spout Mounted
1. Unscrew the empty bottle.
2. Add soap into the empty bottle.
3. Affix the bottle with full soap onto the pump, and do not over tighten..
Use
1. Place hands immediately under soap spout.
2. A predetermined amount of soap will dispense.
3. If more soap is needed, please remove hands & repeat.
Incorrect Installation
Keep sensor range adjustment within 4 inches away from centre of spout. This can only be done with optional remote control.
Installing electronic soap dispenser and faucet with intersecting centre lines might lead to accidental activation of either or both.
Correct Installation
Keep sensor ranges factory preset.
Keep soap spout and faucet centre lines parallel.
Usage of Green Button
When the soap bottle is filled with soap, press green button till soap dispenses out of nozzle.
Please do not use the sensor when the green switch is pressing, because they cannot be used at the same time, otherwise, it might lead to the damage to the machine.
Battery Replacement
1. Unscrew the screws of back cover.
2. Open the back cover.
3. Properly place the batteries into the box.
4. Close the back cover and fasten the screws.
Place batteries in the battery box according to drawings above.
 
|
