Installation Instruction for Commercial Automatic Sensor Faucet
BathSelect Commercial Hotel Automatic Motion Sensor Sink Faucet
BathSelect Commercial Automatic Sensor Faucet Product DescriptionCommercial Bathroom sensor faucets for Restaurants and Public Restrooms are anti-erosion, anti-abrasion and high strength. Minimize waste of water, by using the automatic faucet. Immediately reduces water waste by eliminating unnecessary and unattended water flow. Fits all standard US plumbing.Uses 4AA Alkaline Batteries (purchase separately).Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi.This faucet can we used for commercial use - Touchless Operation
- Sensitive Sensor with Infrared AI Smart-Chip
- Factory set to 30-second Auto Shutoff (can be adjusted).
- Water Pressure: 0.5 - 7.0 KGS/cm, 10 - 125 psi
- Solid Brass Construction, Polished Chrome Finish
- Easy to Install - Instructions Included
- Water resistant solenoid enclosure
- Advanced energy saving design for long lasting battery life
- Comes complete with Hoses & Accessories
- Power Supply: AC110V And DC6V (batteries not included)
- AC/DC power option.
- ADA Compliant
- Easily can be installed in new or retrofit applications.
- Usage: Commercial / Residential
| 
Intelligent: with its micro-computer controlling its action, the faucet can self adjust its best detection zone as per the color and shape of lavatory!Sensor Faucet finish is polished chrome, with built-in Infrared AI Smart-Chip No Water Dripping Design 100% Touch-free operation.
|
Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles.Cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing and drying hands by eliminating unnecessary and unattended water flow. Commercial Sensor Activated Faucet Special Features:- Durable Vandal-Resistant Brass Body; Ideal for Residential as well as commercial high use applications
- Intelligent: with its micro-computer controlling its action, the commercial faucet will self adjust its best detection zone as per the color and shape of lavatory
- Flashing light indicator; a diagnostic indicators for power up, low battery, and solenoid function.
- Meaning of the codes are described in the installation instructions.
- Convenient to maintain; with built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
- Faucet can be mount to any sink surface.
- ADA Compliant
- Batteries life 8,000 cycles per month and with enough water pressure is approx 5 year service life of the batteries.
- Adjustable sensing range; while the factory range is set about 4"to 5"from the sensor, it can be adjusted.
- Applications: Commercial Automatic motion sensor touchless faucet for High Traffic Use ADA Approved. Restaurants ADA Commercial Sensor Faucets. Malls/Shopping Centers ADA Commercial Sensor Faucets. Commercial Sensor Faucets for Hospitals. Commercial Sensor Faucets for Airports, Malls and Public Areas. Public Restrooms Commercial Sensor Faucets
| Diameter of inlet pipe | DN15 | | Diameter of outlet pipe | DN15 | | Water Pressure | 0.05Mpa - 0.7Mpa | | Power and Voltage | DC.6V | |
| Detection Zone | Factory set 25cm/10" (based on standard inductive board) | | Ambient Temperature | 1 - 45 ℃ / 33.8 -113 °F | | Degree of protection by enclosure | 1P56 |
BathSelect® Manufacturer Warranty Information
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.
- Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
|
installation
|
|
.jpg)
1) Position the base plate into the bottom of the tap(Ensure rubber O-ring is in place)
2) Screw the flexi hose into the bottom of the threaded tube, hand tighten only.
3) Tighten the fixing nut to secure the tap to benchtop(do not over tighten as this may damage benchtop), Do not tighten the threaded tube.
4) Screw control box in a suitable position under the basin making sure flexi hose and control cable can reach.
5) Make sure that the rubber washers are in place in the flexihoses.
6) Hold the plug not the wire to connect and disconnect.
|
|
|
