Installation Instructions for BathSelect Modern Summer Shower Head
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.
- Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided
|
|
Shower
![](https://www.bathselect.com/v/vspfiles/assets/images/Venice-Thermostatic-Rectangular-Recessed-Shower-Head-with-LED.jpg)
No.
|
Name
|
Quantity
|
No.
|
Name
|
Quantity
|
1.
|
Bracket
|
1
|
5.
|
Hexagon Wrench
|
1
|
2.
|
M10 Explosion Screw
|
4
|
6.
|
Power
|
1
|
3.
|
Shower Assembly
|
1
|
7.
|
Water Inlet Connecting Pipe
|
4
|
4.
|
Lock Screws
|
4
|
|
|
|
![](https://www.bathselect.com/v/vspfiles/assets/images/install%202.jpg)
![](https://www.bathselect.com/v/vspfiles/assets/images/1%20Venice%20Thermostatic%20Rectangular%20Recessed%20Shower%20Head%20with%20LED.jpg)
1. Use a hexagon wrench to lose the lock screws then separate the showerhead assembly and bracket.
![](https://www.bathselect.com/v/vspfiles/assets/images/2%20Venice%20Thermostatic%20Rectangular%20Recessed%20Shower%20Head%20with%20LED.jpg) 2. Dig 4 Ø10 holes on the ceiling according to the dimension of the screws.
![](https://www.bathselect.com/v/vspfiles/assets/images/3%20Venice%20Thermostatic%20Rectangular%20Recessed%20Shower%20Head%20with%20LED.jpg) 3. Use a hammer to thwack the 4 screws into 4 holes.
![](https://www.bathselect.com/v/vspfiles/assets/images/4%20Venice%20Thermostatic%20Rectangular%20Recessed%20Shower%20Head%20with%20LED.jpg)
4. Install the bracket on the expansion screws then use copper sleeve wrench to lock 4 screws.
![](https://www.bathselect.com/v/vspfiles/assets/images/5%20Venice%20Thermostatic%20Rectangular%20Recessed%20Shower%20Head%20with%20LED.jpg) 5. Make sure all the water inlet pipe connected well without leaking before insert the power plug into the socket.
![](https://www.bathselect.com/v/vspfiles/assets/images/6%20Venice%20Thermostatic%20Rectangular%20Recessed%20Shower%20Head%20with%20LED.jpg) 6. Fix the shower assembly on the bracket by turn the locking bolt.
Shower Mixer Installation
![](https://www.bathselect.com/v/vspfiles/assets/images/Valve-Control-Install-1.jpg)
a. Release Six handwheel levers according to above directions.
b. Take apart the embed valve, panel, and handwheel.
![](https://www.bathselect.com/v/vspfiles/assets/images/21%20New%205%20Function%20Super%20Luxury%20Oil%20Rubbed%20Bronze%20Shower%20Head%20With%204%20LED%20Waterfall%20Rainfall%20Shower%20System.jpg) 1. Dig the embed space for the pipe on the wall according the specification of the valve.
|