How to Install for BathSelect Rio High Glass Door Walk-In Tub Set | BST10005
Relax and wind down in your Rio High Glass Door Walk-in Tub Set by BathSelect, featuring 100% glossy white acrylic and a contemporary stand-alone design that complements any bathroom decor. The Rio High Glass Door Walk-in Tub Set offers the ultra-low step-in that providing a very short step to enter your bath, prevents any water from spilling into your bathroom, helping to keep you safe and secure. Rio is equipped with a high glass door enclosure to prevent water from spilling into the floor and a bathtub shower set. Requires no additional plumbing, and once activated it rapidly pumps the water out from within the tub making it safe to open the door and exit the tub.
Features:
Brand Name: BathSelect
Model Number: BST10005
Type: Walk-in Glass Door Tub
Function: Massage Walk In Tub
Capacity: 1 person only
Material: Acrylic
Door Type: Glass Door
Finish: Glossy White
Size(LWH): 62.9" x 37.4" x 77.1"
Shape: Rectangle
Drain Location: Center
Inclusion: Mixer Valve, Handshower, Body Jets
bathtub
Important Note:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty may be voided.
Bathtub Installation Instructions
Step 1:
Step 2:
bathtub installation
Step 3:
WATER SUPPLY DEVICE The location of the Hot and Cold water supplies establish the basis for locating the bathtub. Use the hoses to connect the hot and cold water outlets.
INSTALLATION INTRODUCTION
1. Before installing, consideration should be given to whether the chosen location and installation is capable of withstanding the pressure generated by the product.
2. Place the Bathtub in the chosen position, adjusting the level to make the drainage system level and functional.
3. Tighten the screws on the corner supports to ensure that the corners of the product are all touching the floor.
4. Install the Drain Tube
5. Install and securely accommodate cold and hot water inlet hoses, then install Mixer, install Drain Popup.
MAINTENANCE AND CLEANING
1. Use soft cloths and general-purpose cleaners. The use of cleaners with Acetone or Ammonia is prohibited. To disinfect, it is prohibited to use disinfectants with formaldehyde.
2. For dirt spots on surfaces use a soft cloth with Toothpaste to clean carefully.
3. For chrome parts with stains, use a soft cloth to clean. Avoid using abrasive cleaning products.
4. Frequently check and clean the return net cover to prevent clogging.
SPECIAL RECOMMENDATIONS
1. Please hire qualified people to install bathtubs according to the recommended installation process.
2. When using always open cold water first and then adjust with hot water. Never open the hot water tap first.
3. There must be adult supervision when children use the bathtub.
