How to Install BathSelect Lima Multi Color Water Powered Led Shower With Adjustable Body Jets And Digital Mixer | BT-892RBD
Turn on the fun in your shower and experience the true feeling of rain, as well as SPA body massage spray, relieving fatigue and stress just by turning on the water in a high-pressure bathroom head shower with 360° 6 adjustable body spray jets and a hand shower. This shower set has been made with premium-grade material and the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built-in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.
Features:
Brand Name: BathSelect
Model Number: BT-892RBD
Material: Solid Brass
Finish: Oil Rubbed Bronze
Water Flow: Rainfall
Showerhead Height (thickness): 0.33
Showerhead Width: 20"
Showerhead Length: 14"
LED Power Source: Water Flow
LED Color: Available without changing color or with LED colors Blue, Green, Red
Shower Style: Recessed Rain Showerhead
Connection: 1/2" US standard (included)
Body Jets: Comes with solid brass 360° adjustable Body Jets size 5" x 5"
Controller: Digital Smart Control
shower
Important Note:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
Shower Head Installation Instructions
Step 1:
recessed
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7: (LED Control Box)
Step 8:
Hand Held Shower Installation Instructions
Step 1:
Step 2:
Handheld Shower
Step 3:
Hand Shower Outlet Installation
• Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow. Note: This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting.
• Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint. Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation.
