Home > Installation Instructions for BathSelect 20"X40" LED Stainless Steel Rectangle Shower Head Brushed Gold Finish

How to Install BathSelect 20"X40" LED Stainless Steel Rectangle Shower Head Brushed Gold Finish | BZ-5686BG


LED shower heads' philosophy is to bring a fun and modern feel into the bathroom. Color your daily shower with this beautiful and luxury rectangle color-changing LED shower head. The LED light is powered by water flow, and will be activated once the water is turned on.

Features:Visit Product Page
  • Feature : LED
  • Finish : Brushed Gold
  • Body Material : Stainless Steel
  • Dimension : 20" x 40"
  • Shower Arm Included : Yes
  • This shower head will change its color by detecting water temperature:
  • 0-30 Degrees : Blue LED
  • 30-40 Degrees : Green LED
  • 41-50 Degrees : Red LED
  • 50-100 Degrees : Flashing Red LED
  • Flow Rate : 2.5 GPM
    		• showerBathSelect 20"x40" led stainless steel large rectangle rainfall showerhead brushed gold finish

    Important Note:
  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the products for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
    		•


    Shower Head Installation Instructions

    shower

    Step 1: Step 2:
    According to the template (B) mark the location of the mounting holes (1). Use a drill with a 6mm bit to drill mounting holes into studs or blocking.

    		Install the mounting brackets (C) with the tapping screws (D1). Thread the shower bars (E) onto the mounting brackets, and the inlet hose (F) onto the water inlet.


    Step 3: Step 4:
    Attach the shower head (A) to the shower bars (E). Connect the inlet hose (F) to the showerhead.

         		2 water inlets so the water disperses equally throughout the showerhead.

    Step 5:








    Additional Information:

    Specification:

    - The LED lights are powered by water flow and will be activated once the water is turned on.
    - Constructed from stainless steel for durability and reliability.
    - Finished in high quality, corrosion-resistant.
    - Not suitable for low pressure. The minimum required water pressure is 0.1 MPa (1 bar).
    - Flow rate 2.4 GPM (9 LPM).
    - The LED light will change its color by detecting water temperature:
    - 0-30 °C (32-86 °F): Blue LED
    - 30-40 °C (86-104 °F): Green LED
    - 40-50 °C (104-122 °F): Red LED
    - 50-100 °C (122-212 °F): Flashing Red LED
    BathSelect Installation Instructions