Bravat Ceiling Mount Dark Oil Rubbed Bronze Shower Set With Thermostatic Mixer Valve ConcealedThe Bravat Dark Oil Rubbed Bronze Shower Set With Mixer Valve Concealed Ceiling Mount is one of the most trendiest finishes across decor styles in the bathroom. It has a contemporary style with a beautiful Dark Oil Rubbed Bronze finish. Turn on the fun in your shower and experience the true feeling of rain, as well as SPA body massage spray, relieving fatigue and stress just by turning on the water in a high-pressure bathroom head shower with 360° 6 adjustable body spray jets and a hand shower.
Bravat Dark Oil Rubbed Bronze Shower Mixer Valve Concealed Ceiling Mounted Features:
Brand Name: BathSelectModel Number: BS1055Type: Shower Set & Shower MixerStyle: ContemporaryType: Fixed Support TypeSurface Finish: Dark Oil Rubbed BronzeInstallation Type: Ceiling MountControl Type: Single Holder Dual ControlSize: 7.91"-11.85" (201-300mm)Surface Treatment: PolishedValve Core Material: CeramicBath Shower Type: In-Wall Shower MixerValve Type: Ceramic ValveFaucet Handle Material: Zinc AlloyMixer Body Material: BrassValve Included: YesEmbedment Depth: 2.16" (55mm)Valve Panel Dimension: 6.29"x6.29" (160x160mm)Connector: G1/2"B (Standard) |  |
BathSelect® Manufacturer Warranty Information
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.
- Please note all showers must be installed by a professional and certified plumber otherwise warranty may be voided
|
shower
|
shower
|
|
Shower Head Installation
Step 1
 
|
shower
|
Step 2
|
shower
|
Step 3
|
Thermostatic Mixer Valve
Step 1
|
mixer
|
Step 2
|
mixer
|
Step 3
|
1) Fix the shower valve into the wall with screws. Use a level to ensure that the valve is straight and level. (Important: Flush the water supply pipes to remove any dirt and debris before installing the valve body)
2) Wrap Teflon tape around the pipe thread. Connect hot and cold water supply lines and all the in-wall pipes(not included) as desired to the valve. Turn on the water supply and open the cartridge to check for leaks. Then, put on the protective cover.
3) Remove the protective cover when the wall finished wall is completed. Install escutcheon onto the shower valve and press it against the finished wall. Then, install the handle and diverter knob to the valve and tighten set screws with the Allen key and put on the indication button.
|
