Antique Gold

BathSelect Venice Brushed Nickel Touchless Sensor Faucet

The BathSelect Venice Series Brushed Nickel Touchless Sensor Faucet is an ultra-modern innovation that adds style and convenience to any bathroom. Designed by the name trusted in luxury fixtures, BathSelect, this touchless faucet incorporates advanced sensor technology with the sleek, modern look of a faucet. It is a deck-mounted touchless faucet. It can work with less than 2W low power, thus being energy-saving. It has a built-in infrared sensor that enables hands-free operation, and reduces contact for better hygiene, and the detecting zone is preset at 25cm or 10 inches from the factory setting but can also be adjusted according to different needs. With that, it would be ideal for public restrooms or homes where more importance is attached to usability and hygiene. The height of the faucet is 140mm, and the spout height is 100mm; therefore, the Venice model can be fitted on different sink types and bathroom configuration settings. The diameters for its inlet and outlet pipe are standard DN15. Efficient working pressure ranges from 0.05Mpa to 0.7Mpa to ensure water flow without hindrance. This sensor faucet also features a high degree of protection by enclosure for durability and reliable performance even in demanding conditions. Be it renovating a commercial bathroom or your own, this BathSelect Venice Brushed Nickel Touchless Sensor Faucet provides all the needed style, hygiene, and efficiency.

BathSelect Venice Brushed Nickel Touchless Sensor Faucet Features:

• Brand Name: BathSelect®
• Model Number: BST6177NB
• Type: Touchless Bathroom Faucet
• Finish: Brushed Nickel
• Material: Brass
• Installation: Deck Mounted
• Diameter of inlet pipe: DN15
• Diameter of outlet pipe: DN15
• Water Pressure: 0.05Mpa - 0.7Mpa
• Power and Voltage: DC.6V AC.220V - 50/60Hz
• Power Consumption: 0.5MW <2W
• Detection Zone: Factory set 25cm/10" (based on standard inductive board
• Ambient Temperature: 1 - 45 ℃ / 33.8 -113 °
• Degree of protection by enclosure: Factory set 25cm/10" (based on standard inductive board
• Faucet Height: 5.5" (140mm)
• Spout Height: 3.9" (100mm)